Dining-room table mes105012

Description short

Dining-room table to pick up chairs on tubular steel painted with epoxy polyester green or black. MDF laminated cover in cream L-138, L-302 min green or gray L-412. Equipped with leveling on one leg.

You can assemble this product yourself - 99


    Estimated dispatch within 7 days to 4 weeks To calculate delivery date, please add to dispatch time: Peninsula (Spain) 1 business day transit time Balearics and Portugal 3 business days transit time Other Europe destinations: 4 business days transit time If you buy products with different delivery times, the delivery will be the longest of all products included in the order.

  • Manufacturer warranty?

    DOMESTIC PRODUCTS: All our products have a minimum of 24* months manufacturer warranty . www.deskansit.com will repair or replace, without charge, any merchandise proved defective in material for a period of two years after the date of shipment.rnThe consumer must inform DESKandSIT.com of the lack of conformity within two months after he has knowledge of it. . . . *CONTRACT PRODUCTS: from 1 to 10 years manufacturer warranty (12 months warranty if nothing is indicated).

  • 100% satisfaction or your money back?

    We want you to stay 100% satisfied with your purchase, so, we give you the right to cancel the contract in accordance with the following terms. You can do this by giving us notice before you receive the goods, or by giving notice no later than 7 working days after the day you received the goods.

176,42 €

213,47 € tax incl.

Related Products

Dining-room table to pick up chairs on tubular steel frame and legs 50x15x1,5 Ø50x1,5 and substructure Ø16x1,5 steel tube painted with epoxy polyester green or black. MDF laminated cover in cream L-138, L-302 min green or gray L-412, with rounded edges painted with polyurethane or laminated chipboard with black PVC edges 2 mm. Equipped with leveling on one leg.

Frame made in steel tube 50x15x1,5 mm and legs in Æ50x1,5mm. Entire weldment by arc welding under inert atmosphere. Has a substructure made of 16x1.5 or steel pipe, used to hang models chairs 209-C, 282-C, 283-C and 284-C.
The structure is subjected to a degreasing and phosphating amorphous, for subsequently receiving a
powder paint finish epoxidíticas based resins, particularly epoxy-polyester thermoset oven.
Options cover:
- The lid is made of MDF board of 18 mm fibers its top face covered by a high-pressure laminate on its underside and by compensating. Edges and rounded corners and varnished.
- The top 18 mm chipboard. covered on its upper face by a high pressure laminate 1 mm and in its lower face by compensating. Cantos in black PVC 2m / m.
Cap structure-Linking is accomplished by threaded bolts galvanized agglomerates.
The bases of the ends of the tubes are in polythene, with a leveling leg.
Possible combinations depending on the extent and chairs

Steel and DM

Color structure
black or green

Color on:
green min L-302, L-138 cream or gray L-412

140x80 cm for 6 chairs 209C size 2 (chair seat 32cm) 5-6 years

160x80 cm for 6 chairs 282C size 3 (chair seat 36cm) 7-8 years

160x80 cm for 6 chairs 283 C size 4 and size 5 (chair seat 39/43 cm respectivamente) 9 a 14 years

180x80cm for 6 chairs 284C size 6 (chair seat 46cm) +14 years and adults


Tallas mobiliario escolar de 2 años a adultos



The ages listed in the table are approximate and refer to the usual heights of children of these ages.


Made in Spain

Data sheet